Thor Forums

[Yvonnemarc]

Originally Posted by javelin

Well if the bedroom drawers are similar to my 2013 ACE, pull the drawer out fully and then simply lift the front of the drawer off the track and the rear of the drawer rollers will follow. To re-insert, place the roller wheels (on the drawer rear) onto the track so they roll into the track and the drawer front will follow back into place.
If that does not work, some drawer systems require you to pull the drawer fully out and near the rear track (I think) on both sides are black plastic release levers. If I recall they release by pushing in a certain direction (up or down).....and for "fun" they each release in the opposite direction of the other. To replace the drawer with this type of release just insert the drawer back onto/into the drawer guides and push the drawer in fully to re-lock. Of course there could be some other cryptic way of releasing yours if they are not as described above. It is a test for patience sent to us all from the drawer Gods.

It isn’t like the 2013s. These have very small black plastic tabs, pull the drawer out till it stops. In the drawer track ( push the track back in a bit leaving the drawer out to find the small tabs, one on each side, push one down the opposite side up and continue to pull the drawer out.