Under advice of my attorney, I thought I would snap a picture of the part the dealership charged me $30 for under the name of of 12vdc transformer. Onan calls the same a AC transformer or 120VAC to 12DC converter. AC/DC Adaptor appears to works too.
My problem is what did they do to cause the connector inside the surge guard for shore power to malfunction? Shore power no longer goes through the ATS. The outlet they added has 120vac and the EC-30 can now sense if shore power is on / off. The problem is when shore power is on, and the sensor knows; but the the actual power is not coming out of output side of surge guard model 40100.
All of this is under warranty and I will take it back to the dealer within a week (if not tomorrow); so we will see what happens. I was hoping for a quick fix tonight to use tomorrow, but that appears to be off the table now.
When this is working as it should, I can pull up to a campsite with generator and ACs running and leave them on, and when I connect to the pedestal, the genset should turn off automatically, likewise if I am connected to shore power, and shore power is loss, the gen should turn on automatically. All of this assumes I am in AUTO mode.
__________________
2019 Sunstar 29ve; Toad Lincoln Navigator; RVi Brake 3 & Command Center; Roadmaster Nighthawk Tow bar & Baseplate; Sumo Springs; Safe T Plus; Onan EC-30 AGS; Vmax 250ah AGM; T-Mobile Internet; H/W Heater / Chassis Disconnect Switches; Southwire Surge Guard 44270 & 34951 w/Monitor 40301; Jet Flo Macerator; Alpine SPE500 Speakers; Visio M21D-H8R
|