Quote:
Originally Posted by Wayne Shuttleworth
So if it's a water pressure problem which it sounds like it is, that tells me that the little on-board water pump isn't adequate. It's not properly matched with the water heater requirements. Is that correct, because then I'll just have to wait until I get to a place that has city water service.
|
The pump pressure is adjustable. You need to read the manual for the pump and turn the proper screw. Most all Sureflos installed in Thor MCs are capable of 55 psi and 2.4 to 3.2 g/m. It is usually not the high pressure cutoff that is improperly adjusted but the pressure bleed's start pressure.