09-06-2020, 12:39 AM
|
#9
|
Junior Member
State: Connecticut
Posts: 9
THOR #20389
|
Quote:
Originally Posted by rudyhehn
Our Lippert system has a re-level set up in the manual. I used it a few years ago. I think you relevel the coach manually to the point you want it to be, then push and hold three buttons. The system blinks three times and you let go and the new level set point takes effect. We rarely use the auto level anymore. We found it usually puts the coach too high and we prefer to be slightly high on the left. Instead I bought two level bubbles and installed by the drivers seat. We manually level the coach using the bubbles. Works well and is very easy.
|
Thanks!
__________________
|
|
|