|
Several of us have had leaking tail lights from the cheap gaskets that were used. I left the covers open for several days facing the sun and the wood dried out nicely. I did not have any rot, so just applied liberal amounts of polyurethane inside on the wood, let dry then installed lights with sealant and no gasket.
If you have rot, there is a penetrating epoxy, somewhat like Git Rot that is sold in Lowes. It kills mold also I think. I used that on the passenger side wall under window that had some rot. Then used bondo over that to smooth out the wall.
__________________
Former owner of 2015 Thor Vegas 24.1 in Ocala
|
Thor Forums
