Quote:
Originally Posted by taylorbob1
But the Onan generators have been known to (on very limited occasions) to generate power surges
Hypothetically...You would then need to have two Surge-EMS systems installed
One for the Incoming shore power, and one for the Onan generator.
Please correct me if I’m wrong.
All Surge/EMS hardwired installations (and instructions) are suggested to be after the ATS
|
Progressive has always stated the their permanently installed EMS be installed in the power cord before the ATS.
Cut the RV power cord about three (3) inches greater than the distance from the
junction box [ATS] to the desired location of the EMS control box. Then strip back the
outer insulation three (3) inches on input, and three (3) inches on output cable.
See visual references on page 9.
Thor Forums
