Back to the original post...
Yes, you can and should place your hardwired Progressive or other brand EMS device between the Auto-Transfer-Switch and the Converter/Charger/Junction Box (which is located under the fridge on your 24.1)
There’s an orange “hot” line coming from the ATS.
Splice the EMS into that line.
In my install, I needed to add a small 1” x 4” pine board to use as a mounting point for the EMS.
Also see that I placed my remote switch with double stick tape on top of the EMS.
I decided that I really didn’t need to see the display 24/7. Plus, the extension wire wasn’t quite long enough to place at my preferred mounting point.
Here’s a photo of my install.
__________________
'17 Vegas 24.1
Fallbrook, CA
|