Update:
My Jet-Flo does not come until next Tuesday
But today, I fired up genset after it had been sitting for months in anticipation I might use it to power the Jet-Flo
While it was running I noticed the 12vdc output is only
8.3 amps So my Portable Genset is Piss Poor Performer for Poop duty by the Power Police
So out comes my old reliable Battery Charger. See picture. I will have to use it on the 50 amp setting to see if the unit works. I am going to trust the ACE versus going with my instinct. I can always stop it if it gets too hot.
I bought 2 50' 3/4" hoses from Harbor Freight. I am a sucker for a sale and they put them on sale today.
Note: I only need 75' so I may cutoff 25' of one section. Just to put a little less strain on the pump. If I buy a fitting I could actually make a free extra 25' 3/4" hose for something else
But to add to the drama, I may return both 50' hoses and buy 1 100' and do the same thing. It would eliminate one possible leak point.
I plan to roll both hoses or the one long 100' hose up on my oldest hose cart, but not use the 3 ft connection hose to the cart. The cart will be for Poop hose storage only.
Right now all tanks are empty and we almost had a freeze last night. But if this works well with the battery charger, I will look for picture from The Rooster to see how I may wire a 12vdc source inside my wet bay.
Thor Forums
