Quote:
Originally Posted by 714Greg
When blowing out the lines and you open each hot faucet it’s blowing through the hot water unit as well so my assumption is that is sufficient. My understanding in reading the manual it mentioned 2 methods air or antifreeze since it said or I went with air as being sufficient. I have a friend who swears by doing both, I believe air should be sufficient. I’ll know when we head south later after the freeze if I’m right or not!
|
YEs, we decided on the compressor method, because the manual said it was sufficient. I just need to know where the air goes in.
There's this little translucent rubber hose bit, it makes a 90° into the inlet assembly, is that where I put my compressor hose?