I use many times a month
It is what the Engineers at Onan said all should. They state the the AGS is the best way to ensure that happens and thus they insist they have significantly fewer issues with customers that own and use a AGS.
I have 9 year old Chinese made Sinemate Portable Generator that use to be a PITA to start. Priming instructions call for pressing that bulb 50 - 70 times
Every time there was a storm, by the time I got it started the power would be back on
I finally put Seafoam in the gas on my Portable (Note: Onan told me specifically to never add additives to the gas feeding genset) and cleaned out carb and let it clean it self, it took about 3 hours of sputtered running. Since then I fire it up at least twice a month. I prime the bulb about 5 times and turn the key and it starts right up. I never pull the cord anymore
But I always put Seafoam in my gas containers for all of my engines.
Point is you are right, I bet if you start running at least an hour a week, you will no longer need to prime once that carb is flushed clean if it is gummy. The longest my Genset went without starting was when it was with the RV Dealer
BTW, the EC-30 has a Safety feature so even though you may have it in Quiet or Auto mode; if you turn the ignition it automatically turns the AGS off; you must go turn it back on at the controller. This ensure that whenever it is being serviced it is always off unless it is mobile repair who comes to my house and it is on. But I am too cheap for Mobile service
Thor Forums
