The forward, side frame may work. Pop the cup holder to see the structure inside. Still not heavy duty..
The center assembly is mounted to a wood block in front, only by a small metal "L" bracket w/ 2 screws and is held in place in the back by the black bracket that clips to brackets on the side of the seat frames. You can see the wood block in the slide photo and small lip on the bottom of the center section that goes in front of the block. The seat frames slide into the "C" channels on the slide floor. Hope this helps. ( I took my seats out and had them reupholstered.)
__________________
U.S. Coast Guard retired- 1956-1985
Pensacola, Florida
2016 Siesta 24ST
1972 Moto Guzzi Eldorado
|