Quote:
Originally Posted by The_Breeze
With this in hand, do I reuse the ignition delay and just wire the LBIM as the trombetta was wired or do I bypass this device altogether?
|
Looking at the schematic provided by Bill Johnson, it seem to me that you would bypass it. I am basing my response on the schematic which does not seem to me to look much like your photo?
The lead from the ignition would go the LBIM post marked "ign" and the lead from the "emergency" switch would go the post marked "sig". The LBIM would replace the Trombetto.
I am not familiar with your specific arrangement but this would replicate what I and others have done.
You may want confirmation from others.
The following might provide some guidance/understanding.
https://www.explorist.life/how-to-wi...tery-isolator/