Quote:
Originally Posted by JamieGeek
Should be able to bench test it by cutting off the end of an extension cord and hook the wires to the input.
Then hook the 12V wires to a battery (the RV's or a car).
Plug in the monitor and see what the inverter does when you plug in and unplug the extension cord.
|
We may be writing the same thing but to test I need the inverter pulling on the batteries while the inverter receives 120 from itself. So it's 12v in, 120 inverter out to inverter 120 in. I need to intentionally create that loop with a load in between to see if the logic exists. Yes?
I'll try to come up with a crude drawing or maybe it's just time to install that copy of Visio I've been sitting on...