Brake Controller
We're flat towing a 2017 Jeep Wrangler JKU behind our 2015 Axis 24.1.
The biggest challenge was locating the Brake Control Wire up front, under the driver, to hook up the brake controller. There is a thread here somewhere that gave detailed pictures. If you're paying someone to install the brake controller then you may not have to worry about it.
Once the wire was identified and located along the underside, it was a 15 minute job to splice it into the bundle. Below are the components I went with on our rig.
Blue Ox Base Plate
BrakeBuddy 39530 Stealth Braking Package
Wiring CM-58903
Blue Ox Tow Bar
__________________
|