Thor Forums

[Vibeman]

We have a 2020 29M and had some problems in the same area. Our electrical junction box had the cover properly attached but was located in the path of the gray water flex drain pipe such that the pipe would catch on the box every time the slide moved in and then after a significant amount of strain, jump up and over it. The drain pipe was not yet damaged and fortunately there was enough slack in the electrical wires to allow me to relocate the junction box away from the path of the pipe. I also had a couple of minor water leaks under the kitchen sink caused by loose fittings. It is a difficult area to access but it helped to remove the kitchen drawers, the back panel under the sink and the rubber flap cover under the slide. Long arms help too. The only reason I initially noticed the interference was that I was already working in that area to install another heat run to divert some of the excess heat going to the bedroom.
After I was done, having the kitchen drawers removed let me to watch how everything moved while operating the slide from the Firefly panel nearby. This enabled me to tweak everything for the smoothest operation.
-Ken