|
Yes it has three camera wires going in the splitter box and one going out to the Axxera. I moved the output cable to the new Eyoyo monitor and shows no signal. The Eyoyo is set for the correct input but I tried all the input setting but no signal.
The splitter box has 12 volt power. I had the motor running and tried transmission in reverse and also tried left and right turn signal. I also had the Axxera power on but the touch screen does not work. Same message, no signal to new monitor.
My best guess is splitter box is defective. Any advice will be appreciated.
__________________
|
Thor Forums
