Quote:
Originally Posted by Down South
That's a good question and one that I had asked in a roundabout way.
After doing research on this it appears that what you have is good enough.
I ran a #12 wire from the 7 pin which is the center pin on the 6 pin that plugs up to the Jeep.
I installed a 15 amp diode and a 15 amp fuse at the toad battery. I tested it and it is supplying power to the toad battery.
I'll be making a couple day road trip in a few days for a better test.
|
I tried this setup but have been unsuccessful. I show 12V at the 7pin connector on the RV and have run a 12G wire from the center pole of the 6pin connector on the toad side through a fuse to the battery. My battery keeps dying after two hours of driving.
I'm a bit stumped on how to trouble-shoot this. Is it a current issue?