Quote:
Originally Posted by Allanh9
The correct answer is “Have the main house switch on because there is no inverter”. Also, the chassis battery does not charge from shore power. You can add a trickle charger to remedy that issue.
To add a trickle charger to an Axis 25.6, remove the desk assembly in front of the passenger seat. Carefully saw through the two tabs on the plywood cutout and remove the cutout. Dont throw it away! I’ll tell you how to use it later. The results access hole is directly over the chassis battery. Attach a trickle charger and run the wire under the edge of the desk assembly. Replace the desk, plug in your charger to 120 outlet by passenger seat. You now will charge you chassis battery and house batteries when plugged in to shore power. Be sure the main cutoff switch is ON.
|
Unless the new Axis are different, the chassis battery is charged on both shore power/generator and engine alternator as are the house batteries.