Quote:
Originally Posted by Seabee
Thanks for the replies. I kind of figured those two ways of mounting them. I'll have to research the locations of the roof supports now so when the time comes I'll know where to look. Thanks again. Ed
|
The panels are light weight
Solid panels are 15# vs 3# for Flex panels
So there’s no need to over-analyze
The Vegas/Axis roof is TPO rubber over 1/16” sheet metal & plywood
There’s enough “bite” to hold screws if you don’t strip it
Here’s my current solar set-up with Sika-Flex adhesive only
Along with my Winegard SK-1000 (which is screwed-in)
You can see that I use Gorilla Tape to fasten cables. Works just fine without adding holes.