I am not sure in which plant your coach was manufactured (probably 250), so this may not apply. For plant 750 the basement doors are cut from the same lower wall that is mounted to the coach. This is done on a CNC router table on the factory floor. The doors are have the aluminum edging and the attaching hardware applied and are reassembled on the lower wall side before installing on the coach.
I had three doors including the large rear door under the bedroom slide replaced after a side swipe accident. Thor Plant 750 was able to supply the three doors in about a week after they were ordered by Iron Horse RV; who, by the way, is not an RV dealer of any kind. Plant 850 uses basement doors made off site since the doors have bonded aluminum surfaces and the plant does not have that capability. Your doors appear to be of the type that plant 850 uses.
__________________
Jim & Roy Davis
2016 Hurricane 31S
1961 Rampside in tow
|