Winegard connect 2.0
Hello-
My 21 shadow cruiser id240bhs came pre-wired for the connect 2.0. Has anyone added this? There is a wall plate on the ceiling inside the Rv with a sticker from Winegard that reads pre-wired for connect 2.0.
There is a 12v power line taped to the back of the wall plate which is routed to a switch near the tv console. Behind the wall plate there is an opening about the size of a quarter. Does anyone know if I should use this hole as a guide for the placement of the antenna on the roof?
I don’t want to drill through anything like an ac duct or wiring but there is no indicator on the roof as to where to tap the hole to run power to the roof.
Let me know your thoughts and thanks much.
__________________
|