Quote:
Originally Posted by mleitner@charter.net
Sorry about that. I will explain what I found. Mounted on the frame under the slide is a "T-Bar" that rides in a channel in the slide to keep the slide aligned. Unfortunately, there is a step in the channel that reduces its width by about 1/4" on each side when the slide is retracted about 6". If the slide is slightly misaligned, it will catch on the T-Bar creating a hard mechanical stop. When this happens, I can use a crowbar in there to force the slide around the T-Bar in order to fully retract the slide. I need to have an expert look at why this is happening and to find a more permanent solution. Below is a photo taken from under the slide looking a the white T-Bar. I hope this is helpful!
|
There should be roughly 3/4-1" from each end of the t-bar to the channel it rides in. The t-bar is held in place by 4 screws accessible from under the coach. Mine were held in place by 1 screw which allow the bar to shift and bind.
See my post here -
https://www.thorforums.com/forums/f4...ion-12095.html