Interesting:
Outside at the LP tank I get the following:
With the 5 amp fuse in, I get 13.1 volts on the Orange wire
With the 5 amp fuse in, I get 0.0 volts on the white wire
With the 5 amp fuse out, I get 0.8 volts on the Orange wire
With the 5 amp fuse out, I get 0.0 volts on the white wire
Inside at the panel I get the same readings except when the fuse is out, I get 0.9 volts from the Orange wire and White wire when I use the multi-meter on them at the same time.
With the fuse out, the correct reading shows up on the interior panel.
The Orange and White wires connect to the 2 black wires and should be going to the little square board on the interior panel.
On my initial post, I noted that the black part of the sending unit was warm to the touch. It still is warm if it is connected to the orange and white wires.
I have not been keeping the black wires connected to the orange and white wires and the sending unit is no longer warm.
Rick
__________________
2021 Outlaw 29S.
|