Thor Forums

[crey0517]

Originally Posted by Normfitz

I have put about 500 miles on my new 2016. One rain event and noticed a leak in the windshield. Dealer fixed it but hasn't rained yet, so... I have a gap above over cabin bed and was wondering what the "up" setting should look like. Jamming the pins in is a pain. I also think my rt front wheel is just not right. I will have the alignment checked ASAP, Before I wear thru a set of tires. Also excessive road noise from the right front of the rv. Screws falling from everywhere , no forward table and missing the center cushion for the banquet bed. BTW does your pullout couch hit the opposite cabinet when fully open? Seems odd that it is to big for the width of th coach. Also why doesn't thor label the switches in the coach?

Good morning - I have a 2016.5 38RE. Our overhead bunk pins insert easily with about a 2 inch gap at the top. When we finally decided to purchase the 38RE, we asked the salesman about the couch hitting the fireplace; we were told that there was a "fix" for the couch hitting the fireplace and that the upgrade would be done when we bought our coach. When our OUTLAW arrived, it had a new foldout couch that clears the fireplace by a foot or so. We haven't had any issues with the windshield or excessive front-end noise do far. I agree about the lack of labeling for the switches. Currently, the OUTLAW is in for warranty repair - the right rear slide was not level and had gouged the flooring and was rubbing across the top of the bed platform. The shower was leaking between the door frame/shower pan and underneath from the shower drain. THOR customer service has been outstanding when ever I have called with questions or issues!