There’s a whole lotta stuff going on here, and you’re on a long trip.
- you’re telling us it’s the ATS, then you can wire around it directly to shore power. You just need 3 big wire nuts to work around the ATS
- then.,,if everything works, you’ve isolated it being the ATS (Probably the solenoid inside the ATS)
The only problem after that is the Genny “work-around”
You can go to HomeDepot/Lowe’s and get several large plugs (male & female).
Then do old-school and plug in the shore power when using that or plug in the genny when using that
(All of these suggestions above are based on it being a bad ATS)
On the other hand...
If it’s a bad 50amp breaker, then pull it and go find one to replace
__________________
'17 Vegas 24.1
Fallbrook, CA
|