Quote:
Originally Posted by TurnerFam
Thor generally provides not only a vent within the INVERTER compartment, which is generally in one of your rear compartments, but many times also a 'secondary' FAN, temperature controlled, ADDED by the factory. It's not necessarily the INVERTER that is getting hot, but the Fan SENSOR is getting hot, meaning the fan will STAY ON, sometimes hours and hours, even when you are NOT using the inverter.
Touch the 'button' sensor with a piece of ice for a moment, and it will turn the fan off.
|
I have the ADDED fan…. Operation is a problem in warm/hot weather. Fan always on, unless you use the ice cube approach or just disconnect the temperature switch.
Have tried to find a temperature switch with slightly higher set points, but no luck. Have you investigated that alternative? Any success?