Quote:
Originally Posted by halfprice
Tom,
Activate the step motor and as it moves toward the out position unplug the power cable going into the motor. This stops the motor midcycle
It helps to take the plug out first to understand how it attaches
Once you figure that out open the door while you're under the step holding into the wire plug
It helps to have someone open the door while you're holding on to the plug
When the motor, swing arm, is in the middle of the cycle just push the step to the swing arm and put in the pin
Jerry
|
Jerry, thank you. That worked perfectly. I really appreciate the help.
Kona Tom
Thor Forums
