Wiring new tail lights
I recently acquired a 2016 Freedom Elite and noticed that the left backup light was not working. Inspection showed the bulb was fine but the electrodes were corroded to the point of not being functional.
I decided to replace the tail lights with Bargman LED fixtures. I have enlarged the opening to accommodate the new fixture on the left and temporarily connected the wires before drilling the holes for the screws to attach the fixture.
When I tested the lights, I have the tail lights functioning, the backup light functioning and the turn signal working, as long as the tail lights are not turned on. If I turn on the tail lights first, the turn signal does not work.
I wired the green wires to green, the black wires to black and connected the white ground wires. What could be going wrong?
__________________
|