Quote:
Originally Posted by Judge
This can also happen when the pressure sensor goes bad. The sensor does not read enough pressure for the system to think the jacks are retracted. The motor will continue to run even after the jacks are fully retracted. It can even lead to the 100A breaker tripping.
I got one on Amazon for my old Outlaw 29H for about $110 a few years ago and it fixed the problem.
|
There are three different pressure sensors. A 300 psi used to ground the individual jacks. A 1,500 psi used in the return lines to indicate all jacks are up. A 3,000 psi limit switch to to prevent blowing the jacks' seals or stalling the motor.
Thor Forums
