Thor Forums

[ksroskel]

For 120V wiring green is earth ground and white is common. The wire goes into the coach under the bed. One end goes into the load center. I suspect as the earth ground connection. I will need to remove the load center front panel to confirm. The other end is connected to the case ground point of the inverter. In the schematic there is a note saying "Ground recepts used & system bonded to Chassis". The schematic also shows that the transfer switch should also be grounded but I do not see that connection.
I am going to connect the green wire to the chassis ground lug that is located right under the bed. I suspect this is how is was intended to be used