Thanks for the response
16ACE27. The bottom plastic guide fell off during the road trip. My wife found the plastic guide on the floor. I re-screwed it to the bottom of wall. My guess was the door was hanging loose and the movement, may have caused the gap. I found this tool from Amazon. Will be ordering it so I dont have to remove the cover panel of the track.
[/B]
Quote:
Originally Posted by 16ACE27
Get on a step stool and look at the top of the door.
You will see it hangs from two cars.
Each car has a release slide/lock if you want to remove the door.
The slide/lock captures a threaded hanging rod with a lock nut on it.
Loosen the lock nut and twist the threaded rod to raise or lower that side of the door.
Changing a single rod length changes the angle the door hangs so you can close your gap.
But look carefully at the hardware and see if you can determine WHY you have to adjust the door now. Has the track or car or something on the door come loose?
|