Quote:
Originally Posted by dkoldman
Do any of you have thermostats with a mode in between Fan On and Auto?
i.e. on Air Excel Thermostat model we have Cool Lo & Cool Hi, but if we are boondocking near others we don't run the AC at all during the quiet time. If we have shorepower, then at night we have FRONT AC on AUTO with temperature set. It is ducted to the bedroom. It is not so much to avoid the noise, but to control the volume of air blowing down on us because it is not as strong coming from FRONT unit in Main cabin to the Bedroom as if it was coming from the unit directly above in the bedroom.
I can't think of when we used FAN on ON either Hi or Low; for either unit? If Generator is running then white noise is none factor, if on shore power, I just assume have the ACs running. From this thread, I may try to put both units on COOL LO one night to see what happens. I think we would freeze
|
Our OEM thermostat had HEAT OFF COOL on one switch
FAN AUTO ON on another switch, and
FAN HIGH LOW on a third switch.
So the fan could be run in either ON or AUTO modes in either HIGH or LOW speeds.