Thor Forums

[b-dent]

Hi Folks, A little help here. Please.

I have read several threads on the subject.
My first try at using the inverter was yesterday. (just purchased the coach 2017 Challenger 37LX with 20k miles).

I turn it on (not connected to SP) it shows me 12.9 volts 0 amps , on the way to the refer - I pass the Micro, no lights on, go to the Refer door lights on, open the door interior light goes on turn on the cooling switch - light goes off and the display on the Xantrex goes blank, stays green but is blank.

I have not checked any connections, knowing the previous owner was clueless about anything I know he did not make any adjustments.

Is this a symptom of the inverter being dead? I have read where there was a batch of bad ones.

Thanks in advance for your responses