Quote:
Originally Posted by Camper Rob
The breaker panel is mounted in the bed frame, which moves with the slide. I will open it up to see what is happening with the wiring. I suspect I may need a new converter anyway, but if there is a short caused by the slide closing, I will need to fix it also.
|
I was wrong about the panel moving. I didn't realize the frame did not move. I found one if the cables from the converter to the 12 volt panel was loose. The terminal is not one that I have seen and I'm not sure how to tighten it.
I found that the converter did not output the correct amount of voltage so it needs to be replaced, but I'm not sure how to tighten the cable terminal on the 12 volt panel.¹