Quote:
Originally Posted by Lamokadave
What do you believe is limiting the current from the charger? Wire size?
|
Probably not wire size. If measuring only 12~15 Amps, that’s so much under the converter’s rated capacity, for which the wires should have been sized, that voltage drop in wires shouldn’t be the problem (unless someone really screwed up during installation and that’s doubtful).
The “stock” converter (I assume not for lithium batteries) is likely seeing the higher voltage of lithium batteries and determining they are close to fully charged and therefore limiting charge current.
The suggested test above by others should confirm wire size is adequate; although just looking at wire sizes would be good enough for me.