Quote:
Originally Posted by LDK
Had Camping World replace a slide out motor a couple months ago. Noticed the retention screw was loose.
Checked closer and screw will not tighten - is stripped. I noticed for whatever reason the retention screw was changed - is now a pan head type versus factory Square. See pic.
I looked at images and appears the retention screw goes into a slot in the motor so assuming the motor should be ok? See pic.
Can you suggest a proper fix? Thank you. Attachment 34850Attachment 34851
|
My solution to this frustrating problem. I attached an L bracket, with one leg to frame, other leg on top of motor. Took picture with my phone. Will attach photo, if I can figure out how.