Quote:
Originally Posted by 16ACE27
Nothing but wire from the generator's output breakers to the ATS input connections. Look at the transition wiring to the ATS - should be solid wire to stranded wire and Thor generally uses wirenuts to make the connection - but they don't do a very good job and this is a common failure point in the AC distribution system on their MHs. Check all the ATS connections.
|
16ACE27 Thanks for all your help FIXED
After following the flex conduit from the Gen it goes into a Jbox and there was the problem.
It was the nut behind the wire nut installer as you can see that black and yellow wire came from the top breaker and was not tied together properly.
Once again thanks for all the help
-------------------------------------------------
Trouble shooting seq
ATS check both legs power from gen
Check JBOX connections to gen
Check gen breaker 120v on white and 120v on black in on position
off position 120v on white and 0v on black (good breaker)
Thor Forums
