Jamie,
I used the toggle bolts, shortened to 1 1/2 inches (as recommended by THor's tech). Where I hit the aluminum stud there on the outside wall I used two self-tapping 1 1/4 inch metal screws.
Getting the teflon plugs (used to seal the holes cut in the wall with the back of the mounting bracket) was easy for 5 out of 6, one required a bit of twitching and cursing to get it to line up - but it did.
Oh yeah, if you hit the stud and choose to mount to the metal stud you you will need to shave the length of the two teflon plugs that fill in the hole drilled for the toggle bolt or else the bracket will not fit flush against the wall...when you first try putting it together.
Get the 72 inch length curtain and if you mount it as Ron showed his (bottom of the bracket 2 1/8" above the top of the plastic shower wall) all will be well.
Doc
__________________
Sheree & Michael NCNG LTC(ret) with Munpi, RC and Sheba (cat).
2019 Nexus Viper 27V, E-450, 5 speed "Ms. Enterprise", Infotainment Center, HUD, , Safe-T-Plus, Curt SpareTire Mount, ext. WiFi Antenna, Roadmaster Tow Sys& Invisibrake.
|