|
All,
Back home now. Interesting conversation going on with the curtain rod mounts.
During my install the mounts on the wall between the bathroom and bedroom were not too much of a problem after shortening the toggle bolts as much as I could. I also backed some paper towel into the hole and below it than squirted in a blob of clear silicone caulk before the final assembly...wanted to be sure to make it water tight.
THe outside wall just has little styrofoam particles that exist behind the thin wall board surface. I used the one toggle bolt and two self-tapping metal screws (since I did manage to hit one of the wall studs) also used caulk blobbed in to help secure a sealed fit with the teflon plugs.
It passed the inspection by the DW this weekend but she want a prettier curtain - plain white did not work for her.
The caulking was a little messy and probably not really needed.
Doc
__________________
Sheree & Michael NCNG LTC(ret) with Munpi, RC and Sheba (cat).
2019 Nexus Viper 27V, E-450, 5 speed "Ms. Enterprise", Infotainment Center, HUD, , Safe-T-Plus, Curt SpareTire Mount, ext. WiFi Antenna, Roadmaster Tow Sys& Invisibrake.
|
Thor Forums
