Thor Forums

[EA37TS]

Originally Posted by ready 2 roll

I have had the RV plugged into shore power overnight with the inverter off. This morning I turned it on and the error code is still alternating flashing E02 with 11.9. Will running the generator and/or the engine itself charge more successfully? Do I need to push the reset button on the inverter(located in a compartment underneath the slide)?
When driving, we plan on having the generator running. Our trip is appox. 6 hrs. Does that sound reasonable?

To reset the error on the Xantrex Pro

Disconnect Shore Power
Turn off the Inverter
Turn the Inverter back on
Reconnect to shore power

This is from page 5-3 of the inverter manual

"Important: In order to reset the unit after an error has occurred, you have to remove shorepower (i.e., AC input), turn the unit off, then turn back on again."

When running down the road you can run the generator if you require the coach AC units, or you can turn the inverter on and the chassis alternator will keep the house batteries charged. During my last outing which was a total of 16 hours of drive time I used my generator for about 1 hour and the rest was inverter time.