Quote:
Originally Posted by p3black
Hey people, have a bit of an issue with some clearance lights. I was changing out all my clearance lights due to their age and condition (2007 Four Winds/Thor Chateau). I was upgrading them from incandescent to LED. I started the installation on the front clearance lights and check each one after to ensure they functioned. Well, i left the battery connected when installing the third light, and I ended up crossing the wires. Now none of the clearance or marker lights come on. The headlights still function, so I used that rulebook the switch. I checked every fuse in the engine electrical control panel as well as in the cabin, and there are no blown fuses. I have been searching for an in-line fuse, but I haven't come across one. My presumption is the the light switch isn't the issue as the headlights function normally. I contacted Thor for a wiring diagram, but they could not provide one. I asked a few RV places in town, but they won't provide the diagrams because they would rather charge me $130 an hour to slowly do a wire trace. does anyone have an idea where to look, or if this particular model has some type of fuse in the wire line? Could it potentially be run through a relay, and if so, is there a way to check it (I only the swap method)? Any help or insight as to where to look would be greatly appreciated. Thanks!
|
But do the parking lights come on, like in the tail lights? If so, that would most likely eliminate the switch and parking lights supply fuse. Now the clearance lights may be relay operated from the parking lights control and have their own fuse which narrows the search to a Thor installed fuse box vs a Ford installed fuse box.