Quote:
Originally Posted by Rey&Reina
Thanks for the replies and the great info. Since the solenoid works when I jump it, it would appear the solenoid is fine. My thought is solenoid is not getting the signal from the switch by the door. Is there a stand alone fuse for that switch? If so, do you know where I should look for it?
Thanks again.
|
Yes there is a 5 amp inline fuse. It is there to protect the coil from over current if the switch is held in for more than a few seconds.
In the picture the coil is in the upper right corner of the bed frame, The red fuse holder is just to the left of the coil.