Thanks for the information
BLW2 -
Thank you for the information. Yes, I have the same style of light and agree that it is not a robust design.
If I have to run a new ground wire, the shortest path to ground that I see, would be from the middle clearance light to the vent in the upper bunk area. This is about 18" and I've confirmed there is a good round wire there.
So the approach would be to drill 3/8" hole through the base of the clearance light (under the amber lens) then snake a wire through to the vent area. This would work unless there is no open area (air gap) between the ceiling of the cab and the roof of the RV. Does anyone happen to know if there is a 'gap' between these that I could run the wire through?
__________________
|