Quote:
Originally Posted by JimOIB
From the EMS-PT30X manual a 2 minute 16 second delay on set up is normal operation.
“Re-apply power to the AC power source and verify that there are still no error codes other than E 0 displayed. If no error codes are present the 2 minute 16 seconds (136 seconds) timer will be activated. During this time, the delay indicator located in the bottom right corner of the display will flash. Once the timer has expired, power will pass through the EMS unit to the RV. “
https://www.progressiveindustries.ne...4eb873cf39.pdf |
 Very helpful information.
__________________
2019 Sunstar 29ve; Toad Lincoln Navigator; RVi Brake 3 & Command Center; Roadmaster Nighthawk Tow bar & Baseplate; Sumo Springs; Safe T Plus; Onan EC-30 AGS; Vmax 250ah AGM; T-Mobile Internet; H/W Heater / Chassis Disconnect Switches; Southwire Surge Guard 44270 & 34951 w/Monitor 40301; Jet Flo Macerator; Alpine SPE500 Speakers; Visio M21D-H8R
|
Thor Forums
