Quote:
Originally Posted by Bill Johnson
I have a 32 inch monitor and I only see one belt. I could be wrong. The other engine has a heater pipe and lower radiator hose pipe sticking out past the crankshaft pulley, I think it would work
|
It seems Pentastar V6 have serpentine belt routed approximately 180 degrees around crankshaft drive pulley, with belt going almost straight up on each side of drive pulley.
On the picture Glenn posted earlier, it looks to me like Thor added a second pulley further out on crankshaft (out beyond OEM pulley though I could be wrong). I’m looking at iPad Mini.
I marked Glenn’s picture with red arrow showing what I think is the original serpentine belt location. The original belt can only be seen on the pulley in that picture if I’m seeing it correctly. That’s not to say the original serpentine belt may not have been modified also in area beyond picture, but to me it looks like there are two belts.
.