Originally Posted by DocMike
I've seen pictures (this Forum) of the unit installed and I have read the instructions. Tough part would be making sure it gets installed on the correct tank...and crawling in under there!
Well open the side hatch: That is the black tank. Not hard to find. If you install it where my dealer did then no crawling is necessary!
Another reason I'd do it myself: I wanted it installed at the rear of the tank, not just any old easily accessible place on the outside.
There is plenty of room to do the install on the right-hand side there (which is the back of the tank--it drains to the left). Installing it there means I can't leave the anti-siphon valve on: I have to put the cap on it every time I use it and I had to shave the top of the cap off so that I could close that hatch. Even with that there is some crushed Styrofoam on the cover to make room for the cap.