Quote:
Originally Posted by Vibeman
I have a 29m with a full wall slide and I ALWAYS lower all the jacks and level the coach BEFORE extending the slide and I suggest you do the same. This should keep your slide pretty level when extended. By leveling and stabilizing the coach before you extend the slide you should have good alignment between the slide and the chassis making it much easier for the slide motors to move the slide. In your video it sounded like you pushed and released the slide button more than once at the beginning. If you did, I suggest you not do that anymore. Instead just push and hold the button once until the slide is fully retracted/extended and the motors have stopped. Then continue holding the button in for an additional 3-4 seconds before releasing.
|
X2. Vegas 25.6. Exactly what we do. If the manual leveler shows slide side down..we drive up on 1 or 2 blocks max on slide side. Put stabilizers down. Extend slide always pushing button on bmpro. Then the passenger jack will raise a little and we lower. Everything level