Quote:
Originally Posted by mburns884
Im sure mine are wired directly to the Firefly system (different version of rapid camp), but I’m trying to find the path of the wire. I want to splice the controller box in this wire, hopefully very close to where it exits the coach.
|
The wiring harness from the Rapid Camp containing 7 different colored 16-18 awg wires. It usually is in a hollow wall, runs under the floor and joins the factory body wring 12 volt harness going to the power center.
In my coach, the control cable from the two awning rocker switches (which are by the entry door) joins the 12 volt body harness and go into a hole in the floor. The cable from the Rapid Camp to the awning comes up through the floor with the stove gas line and runs to video cubby above the fridge where the HDMI cables terminate. It then runs in the main TV HDMI chaise to the main TV's hollow wall where it exits to the forward end of the awning.
It helps to be in the factory when they are building your future coach.