Quote:
Originally Posted by Redsand
Today like yesterday I checked this morning to find the flashing leds and a warm fridge. I double checked the model number and found it's a N611RT (not V) if that makes any difference. As suggested by Beau388 I shutdown all power to reset anything that might be hosing the works in there. I did notice it took 4 or 5 times to light the burner this morning. I'm beginning to suspect igniter or dirty orifice? When I checked I have a nice pointed blue flame no yellow as manual describes.
Any ideas?
|
First, thrn the fridge off - then go out and remove the burner cover. Note the position of the spark wire to the burner tube. The fridge's trouble shooting instructions show the gap and position of the wire. If it checks out, turn the fridge to propane and wait for it to light. It helps to have some one start the fridge, so you can watch the spark and light sequence. The spark wire must be centered in the flame for the fridge's computer to keep the electric shut-off valve open. Of course the flame must be as shown in the instructions.
My fridges mis only blue at the very bottom edge. Most of the flame is orange and completely envelops the spark wire tip