Quote:
Originally Posted by Rvman12
Took a closer look at set up...looks like there are 7 or 8 screws that hold the black panel in place.
Does anyone know the approach to faucet removal? Do you take the knobs H and C off by removing the cover plates marked H and C? Are there bolts behind them to unscrew and free up the faucet?
Getting to the hot and cold water supply connections is the more difficult part as they are behind the black panel. Attachment 40448Attachment 40449
|
I'll look at mine tomorrow - it's very similar in my ACE. I suspect you remove the hot and cold knobs by popping out the center caps and unscrewing a retaining nut.
Then the white cover plate is probably held in place by retaining nuts on the shafts. Once the front plate is removed there are probably screws to hold the rear plate and valve assembly in place. Once you can pull the valve assembly forward you can probably unscrew the supply piping nuts.
OR, the entire assembly may just be held in place by retaining nuts on the inlet piping on the valve assembly behind the black board.